With the hope of create value for full products life cycle for our partners and customers, EMAC working hard on providing our customer 1-stop technical supporting, from installation and commissioning to operation and maintenance, from products overhaul to products replacement. We will give fully support to all of our customers with instruction documents, video tutorials, email support, online voice call services and online video call services. Our technical support will covers products including but not limited to Caterpillar, Cummins, Deutz, Perkins, MTU, Weichai, Yuchai, CAMC diesel engines, CAMC trucks, Fast transmission, Dongfeng Dana axles, Komman Suspensions, Advance transfer case, Advance gearbox etc.
Precautions for Installation of Cummins Diesel Generator
The pipe diameter must be greater than or equal to the diameter of the exhaust pipe of the muffler. The elbow of the pipe connected should not exceed 3 to ensure smooth smoke exhaust. The pipe should be tilted down by 5-10 degrees to avoid rainwater injection; If the...
Trouble Shooting and Treatment of Common Failures of Cummins Diesel Engine
Cummins Diesel Engine-Causes of a lot of smoke when accelerating The air intake is not smooth. Treatment: Check the filter, pipe and turbocharger. The turbocharger should be clean and free of dirt. Be sure to make the turbocharger impeller rotate flexibly...
Cummins Engine Maintenance and Maintenance Requirements
When the ambient temperature is higher than -15°C, use SAE15W40, API CF4 or higher oil; when the temperature is between -20°C and -15°C, use SAE10W30, API CF4 or higher oil. When the temperature is between -25°C and -20°C, use SAE5W30,API CF4 or higher oil...
Precautions During Cummins Engine Operation
The problems that should be paid attention to during the operation of Cummins engine. If the daily operation of the Cummins engine is not standardized, it will affect the service life and work efficiency of Cummins. Therefore, during the operation of the Cummins engi...
Common Problems and Solutions in The Use of Lubricating Oil
What kind of lubricating oil is used for automobile engines is clearly required in the Cummins engine technical manual and should be selected according to the requirements. However, in practice, you may not be able to buy suitable oil. In this case, lubricating oil w...
Why is the engine noise that has just been repaired loud?
The sound of a Cummins engine that has just been overhauled is like a tractor, usually because the valve is damaged, and the sound changes with the engine speed. It is suggested that the owner can check the valve clearance to see if it is seriously worn. The sound of...
Contact EMAC Now!